PCD90200/PCD100200 Precision surface umshini wokugaya
Inkampani yethu iphethe inqubomgomo yesevisi yebhendi kanye nekhwalithi ephawulekayo
uphishekela ukusuka ebuhleni kuya ekupheleleni. Besilokhu sinamathela kusevisi evelele edidiyelwe nesayensi ethuthukisiwe nobuchwepheshe
| Ithebula lamapharamitha | ipharamitha | Iyunithi | I-PCD-90200 | I-PCD-100200 |
| Amandla | Usayizi wethebula(x*y) | mm | 900×2000 | 1000×2000 |
| Uhambo lwe-X eksisi | mm | 2300 | 2300 | |
| Uhambo lwe-Y eksisi | mm | 970 | 1070 | |
| Ubukhulu obuphakathi kwesondo ukuya etafuleni | mm | 560 | 560 | |
| Umthwalo omkhulu | kg | 4000 | 4000 | |
| I-axis yethebula X | Ukucaciswa kweseli le-Table | mmx N | 18x3 | 18x3 |
| Isivinini sethebula | m/min | 5-25 | 5-25 | |
| Y eksisi | handwheel feed degree degree | mm | 0.02/5 | 0.02/5 |
| okuphakelayo okuzenzakalelayo | mm | 0.1-8 | 0.1-8 | |
| (50HZ/60HZ) Isivinini esihamba ngokushesha | mm/min | 990/1190 | 990/1190 | |
| Isondo lokugaya | usayizi wesondo lokugaya ubukhulu | mm | 400×2 | 0-50×127 |
| (50HZ/60HZ) isivinini sesondo lokugaya | RPM | 1450/1740 | 1450/1740 | |
| Z eksisi | handwheel feed degree degree | mm | 0.005/0.2 | 0.005/0.2 |
| Isivinini esihamba ngokushesha | mm/min | 230 | 230 | |
| Imoto | i-spindle motor | H xP | 10x4 | 10×4 |
| injini ye-Z axis | W | 1/2×6 | 1/2×6 | |
| i-hydraulic motor | H×P | 10×6 | 10×6 | |
| injini yokupholisa | W | 90 | 90 | |
| I-axis motor | W | 1/4×6 | 1/4×6 | |
| Usayizi | Usayizi Wephrofayela Yethuluzi Lomshini | mm | 5500×3050×2200 | 5500×3250×2200 |
| isisindo(≈) | kg | ≈10500 | ≈11200 |
Bhala umyalezo wakho lapha futhi usithumelele wona
